NCC Electronic-Professional manufacturer of EEG,EMG/EP and Modular Monitor
中文 日本語 한글 English
Give me message!
Call me!
Verify:
 
Current Location:Home >> Product information >>EMG bio-feedback stimulator
EMG bio-feedback stimulator

Parameters:
 
Bandwidth: 5-500Hz
Short-circuit Noise: ≤0.5mVRMS
Input Impedance: ≥10MW
CMRR(Common Mode Rejection Ratio): ≥100dB
Current Intensity: 0~100mA
Current Setting Resolution: 1mA
Stimulus Frequency: 1~120Hz
Stimulus pulse Width: 50~500us
 
Features&Advantages
 
Lingual and character cue system of working state
Lingual cue for software operation and the patient’s action
Professional prescription is easy to use:professional scheme: provides 52 kinds of prescription scheme, such as myoelectric trigger electricity stimulation.
LCD screen:simple to use, easy to operate
Set prescription freely: Set the parameters freely for therapy as required
Active training based on signal type feedback: Real-time bar graph shows the RMS value of patient EMG signal and gives feedback to the instrument. Control the output of the electrical stimulation through manual setting of threshold value or automatic threshold value.
PS: The automatic threshold adjusts the threshold of evoked electrical stimulation automatically according to the patient EMG signal level. The threshold value automatically increases with the patient’s EMG level. So the patient must “to jump to obtain” each time and this will make the patient get continuous progress step by step.
Portable design and knapsack
 
 

 

 

【Back】